Most water interruptions give some warning, whether through a supplier notice, a flood warning or simply falling pressure. Using that window well provides more water than most households store permanently.
What should you fill first?
The bath, because it holds the largest volume for the least effort. A standard bath takes well over a hundred litres and fills in a few minutes. It is not drinking water, since baths are not clean, and it covers flushing lavatories and washing, which together account for the majority of household water use. Put the plug in first and check it seals.
What else should you fill?
Everything clean, in order of usefulness. Bottles and containers intended for drinking water first, then kettles, saucepans, jugs, buckets, washing up bowls, watering cans and the second bath if you have one. Fill the washing machine drum if you can. Ten minutes of purposeful filling produces a surprising quantity.
- Bath first, for the largest volume in the shortest time
- Clean drinking containers next, from the cold kitchen tap
- Kettles, pans, jugs and bowls
- Buckets and watering cans for flushing
- Fill from the cold mains tap, usually the kitchen one
- Cover anything open to keep dust and insects out
Why does pressure fall before supply stops?
Because interruptions frequently begin with a fault, a burst or works partway through the network, and pressure degrades as the problem develops or as demand concentrates. That declining pressure is your signal, and it can be brief. Filling when you notice a change rather than waiting for confirmation is the difference between a full bath and an empty one.
Which tap should you use?
The cold kitchen tap, which in most homes is fed directly from the mains. Bathroom taps in older properties may be supplied from a storage tank in the loft, which is not intended for drinking and may contain sediment. Hot taps draw from a cylinder and should not be used for drinking water. Run the tap for a few seconds before filling containers.
What about a boil water notice?
Fill anyway, then boil what you will drink. A notice means the water is unsuitable for consumption without treatment, not that it is useless: it is perfectly good for flushing, washing and cleaning. Filling early gives you a stock to boil at your own pace rather than being caught with nothing when supply stops entirely.
How do you keep filled water clean?
Cover everything. Open bowls and pans collect dust, insects and anything falling from above, so cover them with cling film, foil, a plate or a clean cloth. Keep them away from cleaning products and out of reach of pets and small children. Label anything that is not drinking water clearly, so nobody drinks bath water by mistake.
What about the lavatory?
It is the use people forget and the one that becomes unpleasant fastest. A cistern needs several litres per flush, and a household gets through a great deal in a day. Bath water poured directly into the pan will flush it without touching the cistern at all, which is why filling the bath is so valuable. Keep a bucket beside the bath for the purpose.
How long does the window last?
Minutes rather than hours, sometimes. Once a main has burst or the network has depressurised, taps run dry quickly. Treat any notice, warning or noticeable pressure drop as the trigger to start filling immediately, and accept that occasionally you will fill the bath unnecessarily. That costs nothing but the water.
Should you fill even if you are unsure?
Yes, since the cost of being wrong is negligible. A bath of water you did not need is emptied in a minute and costs a few pence, while a bath you failed to fill cannot be recovered once the taps run dry. Treat any pressure drop, supplier notice, flood warning or news of works nearby as sufficient reason, and accept that most of the time nothing will come of it.
Fill the bath first, then drinking containers from the cold kitchen tap, cover everything, and keep a bucket beside the bath for flushing.