Back to Supplies

What Do Micron Ratings Actually Mean

What Do Micron Ratings Actually Mean
Survival Basics Team 7 May 2026

The micron rating is the single most informative number on a water filter, and it maps directly onto which organisms are stopped. Understanding it removes most of the marketing noise from the category.

What is a micron?

One millionth of a metre, also called a micrometre. For scale, a human hair is around seventy microns across and the smallest thing a naked eye can resolve is about forty. Everything relevant to water filtration is well below that, which is why filtration performance cannot be judged by looking at the water afterwards.

How big are the organisms?

Protozoa are the largest, with cryptosporidium around four to six microns and giardia around eight to twelve. Bacteria are smaller, typically between zero point two and five microns, with E. coli around zero point five by two. Viruses are smaller again, commonly between zero point zero two and zero point three microns. That size gap is why a single filter cannot cover all three.

  • Protozoa: four to twelve microns, stopped by most filters
  • Bacteria: zero point two to five microns, stopped at zero point two
  • Viruses: zero point zero two to zero point three microns, generally not stopped
  • A zero point two micron filter covers protozoa and bacteria
  • Absolute ratings guarantee the pore size, nominal ones do not
  • Chemical treatment covers what filtration cannot

Why is zero point two the standard?

Because it is the practical threshold that stops bacteria while still allowing water to flow at a usable rate. Finer membranes exist and they clog faster and require more pressure. Zero point two microns covers every protozoan and effectively all bacteria, which addresses the realistic risks from fresh water in Britain and much of Europe.

What is the difference between absolute and nominal?

A meaningful one. An absolute rating means essentially all pores are at or below the stated size, so nothing larger passes. A nominal rating means the average pore is that size, with some larger ones present, so a proportion of larger particles gets through. A nominal one micron filter is considerably less reliable than an absolute one micron filter, and manufacturers do not always make the distinction prominent.

Does a smaller number mean better?

Not straightforwardly. Below zero point two microns you gain little against the organisms that matter until you reach ultrafiltration at around zero point zero one, which does stop viruses. Between those points you mainly lose flow rate and gain clogging. The right question is not how small but whether the rating covers the specific threats where you are.

What stops viruses?

Ultrafiltration at around zero point zero two microns, reverse osmosis, chemical treatment, ultraviolet light or boiling. Any product genuinely stopping viruses by filtration alone will say so explicitly and will be slower and more expensive. Most so called purifiers achieve it by combining a filter with a chemical or ultraviolet stage rather than by pore size alone.

How can you verify a claim?

By looking for independent testing against a recognised standard. Reputable manufacturers publish log reduction figures for protozoa, bacteria and viruses, tested against standards such as those used by the United States Environmental Protection Agency or by NSF. A product that quotes only a micron figure with no testing behind it is asking you to take the number on trust.

What should you take from this?

That the number tells you what you are protected against, and that a zero point two micron absolute filter plus chemical tablets covers everything biological. That combination is cheap, light and complete, and it removes any need to interpret ambitious marketing claims.

What about particle sizes you can see?

Anything visible to the naked eye is at least forty microns and is trapped by every filter on the market, which is why filtered water always looks clear. That is also why clarity tells you nothing about safety: the water coming out of a badly damaged filter looks identical to the water from a perfect one. Judging a filter by the appearance of its output is meaningless, and it is a mistake people make routinely.

Zero point two microns absolute covers protozoa and bacteria, viruses need chemistry or ultrafiltration, and nominal ratings are weaker than absolute ones.